R.M. Enterprises

Description4S 10A 12.8V 32650 Lithium battery protection and charger BMS Module
This BMS is commonly used in making battery pack for EV and Solar application and also perform very well in under extreme conditions. The temperature sensor is used to monitor battery temperature. Temperature is important, because charging (of most lithium-based cells) is not permitted below freezing temperature and usually above 45°C.

Features:
1) High-accuracy voltage detection circuit.
2) terminal of the charger using a high voltage device.
3) MOS transistor can control the battery charge and discharge.
4) low standby current consumption.
5) Use Lithium ion batteries of 32650 size and of EV and Solar Grades.
6) Battery Pack Output  12.8V (4S Type).
7) Deep Discharge & Over Charging Protection.
8) Comes with Temperature Sensor.

Quick Details
Model Number: TDT-4S-8063B
Place of Origin: New Delhi India
Brand Name: TDT
Base Material: FR-4
Copper Thickness: 1oz
Board Thickness: 1.6mm
Min. Hole Size: 0.20mm
Min. Line Width: 0.1mm
Min. Line Spacing: 0.1mm
Surface Finishing: HASL
Lead Freewith balance function:yes
Over discharge protion:yes
Over current protection:yes
short-circuit protection:yes
Sample/oem/odm:Acceptable
Product name:bms for Lithium Battery
Application: Electronics
DeviceKeywords: 4s bms
MOQ: 1pcs

Overview Quick Details Model Number:                     TDT  Type:                                      bms pcba Place of Origin:                      New Delhi India Brand Name:                          TDT Supplier Type:                       OEM Copper Thickness:                1 oz Application:                            Electronic Products Board Thickness:                  0.2mm-7.0mm Testing Service:                     100% Keywords:                              Pcba Manufature

BMS (3.2V Rated LiFePO4 Battery,

Common Version : common port for charge/discharge 

Separate Version : separate port for charge/discharge

We can customize any PCB from 3S to 32S lithium batteries with different current.

 

1. Overview

 

1.We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.

 

2.The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.

 

3.According to the customer request we can develop PCM in different sizes and structures.

 

4.BMS manufactured by high quality MOS and IC imported. Keep your battery long cycle serivce life time.

 

 

 

2. Advantage

 

1.Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.

 

2.Strong load ability, constant discharge current 25/35A/45A/60A , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.

 

3.IC itself has power balancing function. The circuit is simple and reliable.

 

4.Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.

 

5.Extreme low power consumption. The consumption of the whole device is less than 50uA.

 

6.PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating

 

Overview Quick Details Model Number:                     TDT 3035 Type:                                      bms pcba Place of Origin:                      New Delhi India Brand Name:                          TDT Supplier Type:                       OEM Copper Thickness:                1 oz Application:                            Electronic Products Board Thickness:                  0.2mm-7.0mm Testing Service:                     100% Keywords:                              Pcba Manufature  

Quick DetailsModel Number:TDT-8236Place of Origin:New Delhi IndiaBrand Name:TDTBase Material:FR-4Copper Thickness:1ozBoard Thickness:0.2mmMin. Hole Size:0.2mmMin. Line Width:0.2mmMin. Line Spacing:0.45mmProduct name:BMS lifepo4 batteryApplication:EVKeywords:bms lifepo4with balance function:yesOver discharge protection:yesOver current protection:yesshort-circuit protection:yesSample/oem/odm:AcceptableMOQ:1pcs

Product Specification

Product Specification

Product Specification

3.7V BMS/PCM for inverter bulb and other portable device. protect your Battery.

Lithium ion battery pack